Plati-kote Truck Bed Liner is the only truck bed liner aerosol available in colors. This textured spray permanently bonds with the bed surface and withstands extreme hot and cold temperatures.andnbsp; Non-fading and will not warp or crack. Gasoline resistant. Compatible with original factory paint surface and metal, iron and steel. Truck bed liner may lift or wrinkle a non-original factory finish. Application Tips: Truck bed should be pressure washed and rinsed. Wipe all areas with Wax and Grease Remover. Sand all surfaces with #80 – 180 grit sandpaper. Wipe all areas again with Wax and Grease Remover. Mask all surrounding areas to avoid over spray. Allow 24 hours before using truck bed. See label for complete instructions. Approximate Coverage: 10 square feet per can. A full size pick-up will require 8 cans. Blackandnbsp;andnbsp;andnbsp;andnbsp;andnbsp; White *Colors viewed here are approximate and may vary from actual painted colors.
Please enter in your comments about this item, your past experience with this item, or any other general comments in regards to this item.