Permatex Fix-It Kit

http://www.autobarn.net/permatex-fix-it-kit.html

Fix-It Kit Includes:

* (1) Permatex PermaPoxy 5 Minute General Purpose Epoxy:
Versatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in five minutes, no clamping needed. Clear appearance. Fills gaps and will not shrink. Resistant to water and solvents.Temperature range -60°F to 180°F (-51°C to 82°C). Permanent strength up to 3400 PSI.

* (1) Permatex PermaPoxy 5 Minute Plastic Weld:
A structural adhesive designed for general purpose bonding of a wide variety of materials. Forms a tough, durable bond to most plastics, composites, ceramics, wood in any combination. Fast curing product with gelling of mixed adhesive in 5-6 minutes and fixturing in 9-10 minutes. NOTE: Will not bond most polyethylene or polypropylene plastics. Bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room tempeerature. Cream appearance. Gap filling to 0.125 inch. Water resistant and good chemical resistance. Temperature range -60°F to 250°F (-51°C to 121°C). Permanent strength up to 3500 PSI.

* (1) Permatex PermaPoxy 4 Minute Multi-Metal Epoxy:
Versatile, easy-to-use, multi-metal epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in four minutes, no clamping needed. Dark grey appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. Temperature range -60°F to 300°F (-51°C to 149°C). Permanent strength up to 4500 PSI.

* (1) Permatex PermaPoxy 5 Minute Plastic & Fiberglass Epoxy Stick:
This two part, hand kneadable, putty type epoxy has contrasting colored materials that are mixed together to form a uniform color to indicate thorough mixing. Stick can be drilled, sanded, threaded or filed and is resistant to fuels and solvents after full cure. Holds in five minutes, useable in thirty minutes. Off-white appearance. Fills gaps and will not shrink. Temperature range -40°F to 400°F (-40°C to 204°C). Permanent strength up to 3000 PSI.

Please enter in your comments about this item, your past experience with this item, or any other general comments in regards to this item.

Comments are closed.